What to do when your ethernet won't connect

A wired connection should be simple plug-and-play, but all too often that's not the case.

If you’ve got working Wi-Fi but your wired ethernet connection is not working, the first thing to do is turn off the Wi-Fi. Believe it or not, this might tell you that the ethernet is working. If Windows has access to both, it will give top priority to ethernet, but display the Wi-Fi icon in the notification area. Right-click on the icon, go to Open Network and Internet Settings, then the Wi-Fi tab, and toggle off. 

Even if that doesn’t solve your problem, it will make the tests below easier to run. You’ll see immediately if ethernet is working, which is exactly what you need to know.

If Wi-Fi is disabled and you’re still not getting a network connection, make sure that ethernet is enabled in the same Network and Internet Settings section. 

1110 enable

Find the right network. It will likely say Local Area Connection. If you see Not connected below the name, right-click it and select Enable. It may take a few seconds for the connection to start working, but no more than that.

If that doesn’t fix it, plug the cable into another port on the router. If that fixes the problem, you’ve got a defective router. As long as you don’t need all of your ports, you can get by. Otherwise, check the manual or the manufacturer to find out about a fix. Worst case, you can replace it.

If that doesn’t work, swap ethernet cables—even if you have to borrow or buy a new cable to do so. If that fixes the problem, you came out with a very simple fix.

If none of those tests fixes the problem, the problem is with your PC. But is it the hardware or operating system?

To find out, set up a Live Linux disc or flash drive, and boot from that. If ethernet fails to work here, the problem is with the hardware. Unless you’re really good at fixing computers, I’d suggest you take the PC to a professional.

But if ethernet works in Linux, the problem is with Windows. Try reinstalling your ethernet drivers:

  1. 1110 uninstall ethernet driver
    Back in Windows, go to the Start menu’s Search field, enter device manager, and select Device Manager.
  2. Expand the Network Adapters section.
  3. Right-click the ethernet adapter (hint, it’s the one without Wi-Fi or wireless in its name) and select Uninstall.
  4. Confirm by clicking OK.
  5. Reboot to reinstall the driver.

That should fix it.

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Lincoln Spector

PC World (US online)
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Cate Bacon

Aruba Instant On AP11D

The strength of the Aruba Instant On AP11D is that the design and feature set support the modern, flexible, and mobile way of working.

Dr Prabigya Shiwakoti

Aruba Instant On AP11D

Aruba backs the AP11D up with a two-year warranty and 24/7 phone support.

Tom Pope

Dynabook Portégé X30L-G

Ultimately this laptop has achieved everything I would hope for in a laptop for work, while fitting that into a form factor and weight that is remarkable.

Tom Sellers

MSI P65

This smart laptop was enjoyable to use and great to work on – creating content was super simple.

Lolita Wang

MSI GT76

It really doesn’t get more “gaming laptop” than this.

Featured Content

Product Launch Showcase

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?